For small maritime equipment makers and integrators

IACS UR E27 test procedures, reports and class documents — in one set.

When a yard or class society asks you to prove that your computer-based system is cyber resilient, you need a step-by-step test procedure and a signed report, not just a checklist. This pack gives you record boxes and sign-off at IAT, FAT and SAT, and maps the work to the major class societies, so one set of documents can serve every project.

£449 UK and international · gross, exclusive of VAT
6 290 kr Norway · gross, exclusive of MVA

The pack is not on sale yet. Register below and we will offer you this launch price when it is. A one-off digital download, yours to adapt for your own systems. Single-company licence.

Fictional example — not a real test record A page from the fictional worked example: test TC-T1-01, Human user identification and authentication, with IAT, FAT and SAT rows, recorded-result boxes, Pass/Fail/N/A ticks, initials and dates.
From the worked example: each step has an IAT, FAT and SAT row, a recorded-result box, Pass/Fail/N/A, initials and a date. The company, system and results are invented.

The problem

Class wants a test procedure you can actually run and sign.

For ships contracted for construction on or after 1 July 2024, IACS UR E27, Cyber resilience of on-board systems and equipment (Rev.1, September 2023), is applied by IACS classification societies to computer-based systems in the scope of UR E26.

Suppliers are typically asked for a CBS asset inventory and topology diagrams, a description of security capabilities, a test procedure for those capabilities, security configuration guidelines and, after testing, signed test reports.

UR E27 expects the test procedure to have a separate chapter for each applicable requirement, covering test setup, equipment, initial conditions, detailed steps, expected results and acceptance criteria. Factory acceptance tests are then carried out against the agreed procedure and witnessed by class, unless the system already holds a relevant type approval.

Most small makers do not have a spare compliance team. Consultants and type-approval programmes are built for a different budget. Generic control kits help with paperwork, but they often stop short of a repeatable, requirement-by-requirement test method and a report a surveyor can sign.

What you get

One all-class pack, ready to adapt and rebrand.

Editable Word and Excel, with a logo placeholder, document number, revision, revision history and sign-off blocks. You make the documents your own and agree the procedure with your classification society.

Acceptance test procedure

The core document. One Word file for IAT, FAT and SAT. Each test has a plain-language purpose, initial conditions, numbered how-to steps, an expected result and, for each stage, a recorded-result box, Pass/Fail/N/A, initials and date. Each test ends with an overall result, comments and a signature for supplier, class or witness, and owner.

Requirement-to-test matrix

Every published UR E27 Rev.1 requirement in one Excel workbook: Table 1 and Table 2 capabilities, the section 3.1 documents, secure-development items, plus essential-availability and survey checks. Each row is a short summary in our own words, with the clause and item number and official item title. Class columns sit on every row.

Test report template

A ship- or project-specific Word report: system identity, configuration as tested, results summary, per-requirement records, compensating countermeasures, findings, and signature blocks for the supplier and, where used, the class surveyor.

Section 3.1 document templates

Blank, ready-to-fill Word templates for the other E27 section 3.1 documents: asset inventory, topology checklist, description of security capabilities, configuration guidelines, secure-development evidence, maintenance and verification, incident response and recovery, and management of change.

Class submission guide

One document set for all major classes. A common route, a short comparison, then a section per society. ABS, Bureau Veritas and ClassNK are mapped from their free public rules. DNV and Lloyd’s Register are reference only: the rule number, DNV’s public document codes, and a note to confirm the current edition with your surveyor.

Fictional worked example

A filled procedure, matrix and report for an invented lighting-control system from an invented company, with realistic steps, two failed tests and their fixes, an observation, a compensating countermeasure and an open finding. It shows what a finished record looks like. Do not submit it.

Class clause references are our own mapping to publicly issued rules; the society’s current rules always win. The pack is not issued or endorsed by IACS, DNV, Lloyd’s Register, ABS, Bureau Veritas or ClassNK.

Sample pages

See the record boxes, a failed test, and the sign-off.

These pages are from the fictional worked example in the pack (FLCS-1, an invented lighting-control system from the invented Fictitia Marine Controls Ltd). Every name and result is made up. They are here so you can see the layout, not as a real test record.

Look inside the pack

Partial pages from the documents themselves.

These are the opening lines of pages from the pack, not the fictional worked example. Each preview shows only the start of a page, so you can see the layout. The rest of the page is in the pack.

What this is not

A drafting aid, not a certificate.

  • Not class approval, a System certificate, or type approval. Only a classification society can issue those.
  • Not a substitute for the official IACS documents. You must download UR E27 Rev.1 and UR E26 Rev.1 from IACS and work to the official text.
  • Not a copy of IEC 62443. This pack maps the published E27 text only.
  • No guarantee that class will accept your tests. The official procedure has to be yours, and it has to match the system you deliver.

Who it is for

Small makers on their first E27 job, and small integrators collecting evidence.

It is written for small and mid-size makers of shipboard computer-based equipment — automation, alarm and monitoring, power management, fire, tank, safety and similar OT systems — and for small integrators who must collect E27 evidence from suppliers and run or repeat security-capability tests at FAT.

If you already have a full type-approval programme and a retained cyber consultant, you may not need this. If you need a structured way to write the tests and the report, this is for you.

Price

One price, one pack, every major class.

Market Launch price
UK and international £449 gross, exclusive of VAT
Norway 6 290 kr gross, exclusive of MVA (MVA is added where applicable)

One price for the whole multi-class set: no per-society editions. One-off payment for a single-company licence, when the pack goes on sale. Updates to this UR E27 Rev.1 edition, if issued, are included. A later IACS revision would be a new edition. Prices are labelled gross (list price before payment fees). VAT or MVA is not included in the figures above and is added only where it applies.

Register to be offered this launch price

På norsk

Ett dokumentsett for de store klasseselskapene.

E27 Test Pack er laget for norske og nordiske leverandører av datastyrte systemer om bord som må vise samsvar med IACS UR E27. Pakken er på engelsk, slik verft og klasseselskap vanligvis jobber, og inneholder en trinnvis testprosedyre for IAT, FAT og SAT med felt for resultater og signatur, en testmatrise for hvert krav, en mal for testrapport, maler for de øvrige dokumentene i kapittel 3.1 og et fiktivt, ferdig utfylt eksempel. Ett dokumentsett dekker alle de store klasseselskapene: en veiledning for innsending med eget kapittel for ABS, Bureau Veritas og ClassNK, klassekolonner i matrisen og felles maler for forside, dokumentregister og samsvarserklæring. For DNV og Lloyd’s Register gir pakken regelhenvisning og offentlig kjente dokumentkoder; sjekk gjeldende regelutgave med din klassesurveyor. Pris for norske kunder: 6 290 kr eks. mva (brutto, eksklusiv mva; mva legges til der det gjelder). Pakken er ikke i salg ennå — meld interesse i skjemaet nedenfor, så tilbyr vi deg denne lanseringsprisen. Pakken er ikke klassegodkjenning og er ikke utgitt eller godkjent av IACS eller noe klasseselskap.

Register interest

Get the launch price when the pack goes on sale.

Tell us who you are and which class society you usually work with. We will only use this to email you when the pack is available, at the launch price above. No payment is taken now.

This is a demand test. There is no obligation and no payment now.

Privacy. We use the details you submit only to tell you when E27 Test Pack is on sale and to offer you the launch price, and to understand demand (class society, country, and whether you would buy). We do not sell or share your details with other companies. You can ask us to delete them at any time. Questions: contact us via the form. Submissions are delivered by our form service to the seller and are not published on this page.

Personvern: vi bruker opplysningene bare til å si fra når pakken er i salg og for å tilby lanseringsprisen. Vi selger eller deler dem ikke. Du kan be oss slette dem når som helst. Spørsmål: bruk skjemaet på denne siden.

FAQ

Common questions

Who can use one copy?

One company. Your employees and contractors can use and adapt the pack on all of your company’s own projects, and you can rebrand the documents you produce. You may not resell it or share it with other companies. Full terms will be in the licence included in the download.

Why will each file say “Licensed to … — Order …”?

Each copy carries a small footer line and document property with your company name and order number, to identify your licensed copy. You can delete it from documents you finalise for your projects.

Is the worked example a real system?

No. The company, product, vessel, people, class society and results are all invented to show what a completed record looks like. Do not submit it.

Does this get my system approved?

No. Only a classification society can approve plans, witness tests and issue a System certificate or type approval. The pack helps you prepare the documents and tests.

Do I need the official IACS documents?

Yes. The pack summarises each requirement in its own words and gives the clause number; it does not reproduce the IACS text. Download UR E27 Rev.1 and UR E26 Rev.1 free from IACS and work to the official text.

Can I use it for IAT, FAT and SAT?

Yes. The procedure has a separate record row for each stage on every step, and separate sign-offs per stage. It also notes which tests are usually repeated on board.

Which class societies are covered?

ABS, Bureau Veritas and ClassNK are mapped clause by clause from their free public rules. DNV and Lloyd’s Register are covered by reference only: the rule number, DNV document codes and conditions seen on public type-approval certificates. Check the current rule edition and clauses with your class surveyor. The common route in the guide applies to any IACS society.

Do I need a separate edition for each class?

No. One pack covers every society, so you can use the same documents whichever class the yard chooses.

Why is the Norway price different?

It is set in kroner for Norwegian buyers. Prices are exclusive of VAT/MVA, which is added where applicable.

Official documents

Free to download from IACS

About the author

Written from public rules, for people who run FAT.

Written by a maritime automation system test engineer who works with computer-based systems, FAT/SAT and class survey day to day. The pack is based only on publicly issued IACS Unified Requirements and classification-society guidance. It is an independent product and is not affiliated with, or endorsed by, IACS, any classification society (including DNV, Lloyd’s Register, ABS, Bureau Veritas and ClassNK), or the author’s employer.